20l
2 pack flooringindustrial_flooringindustrial floor coatingfloor coatingimages

30 Litre Nugard Waterbased Epoxy Kit

$651.75

Industrial Floors are perfect candidates to be coated with Nugard waterbased epoxy. It minimises the odor of solvent based epoxies so you can continue to be productive while the coating is being applied. It is an ultra hard wearing epoxy coating that resists chipping, highly durable and washable. It withstands the harsh wear and tear of forklifts. If you have a smaller job such as a garage floor you might be after our 6L epoxy kit.

Clear selection
SKU: 0002.

Product Description

NUGARD is a new water-based floor coating that out performs regular epoxy and urethane products.

NUGARD is a protective coating for concrete, timber and masonry surfaces.  NUGARD’s water-base allows it to be used in industries where odour and non-tainting is important (e.g. food, beverage, pharmaceutical and textile industries).

NUGARD has many benefits:

  • It eliminates the hazard, replacing solvent borne epoxies, urethanes or alkyd enamels
  • It substitutes the hazard, being water based it phases out and replaces solvent based paints
  • It is safe to use and environmentally safe
  • It outperforms, solvent based epoxies and solvent based polyesters
  • It is tough, chip proof and fire resistant

NUGARD is different – it is a water borne two pack coating composition that cross links to produce a monolithic floor treatment in thickness from 1mm to 10mm.  It is durable, washable and abrasion resistant.  It can be cleaned with most industrial cleaning compositions without damage.  NUGARD is the “state of the art” in water based two component coating systems that supercedes regular Epoxies, Urethanes or Polyesters.

Product Technical Specifications

Colour Available in clear and a large range of colours tinted to custom order
Finish NUGARD dries to a gloss finish
Container Size *6 litre Pack – 4 litres Pack A to 2 litres Pack B
Induction Time Allow a 15 minute induction time
Mixing Ratio Mix 2 Parts Pack A to 1 Part Pack B

Pot Life

Once mixed the pot life is 2-3 hours.  Do not mix more than can be used in that time period
Theoretical Coverage Approximate spreading rate is 8-10 square meters per litre per coat
Drying Time Touch dry at 1 hour, recoat at 4-6 hours, when cooler best to leave overnight.  Light traffic within 24 hours.  Allow 7-28 days for a full cure
Thinners NUGARD can be thinned by water
Clean Up Clean up with soap and warm water, if dry use Universal Solvent
Coats 2 coats are recommended

Additional Information

Weight 23 kg
Tint

Clear, Special Colour, Tinting White, White